Black Silicon Carbide Power

Zhen an Metallurgy

Black Silicon Carbide Power

Zhenan Metallurgical Materials provides you with all grades of SiC88-SiC98 silicon carbide. The ones we produce have high wear resistance and corrosion resistance. You can directly use it in the fields of abrasives, wear-resistant materials and cutting tools.

Content of certain elements can be customized

High wear resistance

High corrosion resistance

Wear-resistant materials

Free Sample

Abrasives

Introduction to Black silicon carbide Power

Black silicon carbide is a non-metallic ceramic material composed of carbon and silicon elements. Black silicon carbide has very high hardness, belonging to Mohs hardness level 9.5, second only to diamond and cubic boron nitride.

The high hardness of silicon carbide gives it excellent wear resistance and corrosion resistance. It is widely used in the fields of abrasives, wear-resistant materials and cutting tools.

The silicon carbide material produced by Zhen’an Metallurgical Materials is calcined in a high-power resistance furnace, with a smelting time of more than 200 hours. High-purity, well-crystallized first-grade silicon carbide blocks are used as raw materials.

Types Of Black silicon carbide

Black sIC powder

The particle size of black silicon carbide powder is generally in the nanometer to micron level. Powdered products are commonly used in material reinforcement, coatings, fillers and other applications,

silicon carbide particles

The size of black silicon carbide particles generally ranges from a few millimeters to tens of microns. Commonly used in sandblasting, polishing, surface treatment and other applications to provide uniform abrasive and clean surfaces.

si carbide lump

Black silicon carbide blocks are often used in applications that require cutting, processing or grinding, such as preparing grinding wheels, cutting discs, etc.

Black silicon carbide Specifications

GradeSiCF.CFe2O3
SiC98980.30.8
SiC97970.31
SiC95950.41
SiC90900.61.2
SiC88882.53.5

Characteristics: stable chemical properties, small thermal expansion coefficient, good wear resistance and high thermal conductivity.

Materials: Quartz sand, petroleum coke, silica quartz sand, petroleum coke (or coal coke), wood chips (salt needs to be added when producing green silicon carbide) and other raw materials

Particle size: Abrasive grade: 16 mesh, 24 mesh, 46 mesh, 80 mesh, 325 mesh, 1000 mesh, 1200 mesh, 1500 mesh, 3000 mesh, 5000 mesh, 8000 mesh.

black silicon carbide grit sand

Black silicon carbide powder

Deoxidizer refractory grade: 0-10mm, 1-10mm, 0-1mm, 1-3mm, 3-5mm, 5-8mm

Application scope: machinery, abrasives, refractory materials, aerospace, ceramics, smelting and other industries. .

Product use: used for sandblasting and polishing abrasives, as well as refractory materials, grinding wheels and other abrasive tools, as well as silicon carbide ceramics, semiconductor materials, etc.

Black silicon carbide properties

Black silicon carbide has extremely high hardness, with a Mohs hardness of 9.5, second only to diamond and cubic boron nitride. This makes it excellent in wear, cutting and abrasive applications.

Due to its high hardness, black silicon carbide has excellent wear resistance and is able to maintain stable performance in high friction and high stress environments. Therefore, it is widely used in fields such as abrasives, grinding wheels, grinding tools and cutting tools.

Black silicon carbide has a high melting point (approximately 2700°C) and can maintain stable performance in high temperature environments. It has important applications in the fields of refractory materials, high-temperature ceramics and stoves.

Black silicon carbide has good thermal conductivity and can dissipate heat efficiently. This makes it play an important role in the field of thermal management, heat sinks, heat sinks and other applications.

Black silicon carbide is a semiconductor material with high resistivity and low electrical conductivity. This makes it widely used in fields such as power electronics, semiconductor devices, and electromagnetic equipment.

The surface micro-nano structure of black silicon carbide gives it low reflectivity and good light absorption properties. This gives it potential applications in areas such as solar cells, lasers and optical coatings.

Application of Black si carbide

For Abrasives and refractory materials:

1.Improve the heat resistance, wear resistance and oxidation resistance in refractory material and power metallurgy industry.

2.Basic raw material that high polymer of organic silicon formatting.

3.Iron base alloy additive, the alloy pharmaceutical of silicon steel, thus improve the steel hardenability.

4.It is used in high-temperature material production in order to manufacture enamels and pottery and in producing ultra-pure silicon wafers.

Choosing Black si carbide for Your project

Why choose Zhen An Metallurgy as your long-term partner?

30 years of production and sales experience:

Zhenan Metallurgy is located in Anyang City, Henan Province, China. It has 30 years of production experience and can produce high-quality black silicon carbide sat according to user requirements.

Customized according to customer needs:

Zhenan Metallurgy has its own metallurgical experts, and the chemical composition, particle size and packaging of Black Sic can be customized according to customer requirements.

Worry-free delivery:

The annual output of Zhen’an metallurgical Black silicon carbide is 1.5 million tons, and the spot inventory is 200,000 tons. The supply is stable and the delivery is timely.

Free samples:

Zhenan Metallurgical will give you the greatest support, and provide free Black silicon carbide samples.

Support third-party testing:

Zhenan Metallurgical has a strict quality control system. Black silicon carbide for steel making has been inspected more than 3 times before leaving the factory. At the same time, we accept third-party inspections such as SGS and BV to provide you with the greatest guarantee.

Manufacturer’s strength display:

Our factory covers an area of 30,000 square meters, with a full set of modern production equipment, two large-scale production bases such as hydrometallurgy, two key laboratories and a metallurgical material testing center with 16 senior researchers.

30000(m2)

Our factory covering an area of 30,000 square meters

1500000(Ton)

Annual production and sales more than 1,500,000 tons.

Professional team to provide you with better service

Zhenan Metallurgy has a high-quality talent team integrating sales, production and R&D, including 16 senior researchers, 28 professional engineers, 35 international sales personnel, 10 senior operation personnel, and more than 300 production technicians.

Zhen An metallurgical certificate display

Zhen An metallurgical certificate display

Our products have been exported to 78 countries, and many regular customers have visited our company and factory and placed multiple orders. For one cooperation, customers will return orders many times, and some customers will introduce new customers to us.

What services does Zhenan provide you?

In order to meet the needs of different customers, we accept the following customization:

Customized product specifications: According to the specific needs of customers, you can provide silicon metal products with different specifications, including customized services in terms of chemical composition, size, shape, surface treatment, etc.
Customized packaging requirements: According to the specific needs of customers, you can provide different types of packaging materials and packaging methods to ensure the safety and stability of products during transportation and storage.
Customized product quality: According to the specific needs of customers, you can provide different product quality requirements, including customized services in terms of chemical composition, physical properties, surface treatment, etc.

Ask about custom services

In order to ensure the quantity and quality of the products you receive, we pay more attention to packaging:

High pressure resistance: Our packaging has sufficient pressure resistance to withstand the pressure and vibration that may occur during stacking and transportation.
Shock resistance: Multi-layer packaging avoids possible shock and vibration during transportation, protecting the product from damage as much as possible.
Sealing performance: Adding a layer of waterproof film has sufficient sealing performance to prevent air, moisture and other substances from entering the packaging and affecting the quality of raw materials.
Convenient transportation: We generally use drums or ton bags for packaging, so that you can transport them more conveniently.
Eco-Friendly and Sustainable: Our packaging materials are eco-friendly, allowing you to recycle or dispose of them safely without polluting the local environment.

Learn about our packaging

If you want free samples, the process is as follows:

Contact us: Tell us your needs and contact information through the message form on the website, or send an email to our email andy@zaferroalloy.com.
Communication details: Our professional sales staff will recommend the most suitable products for you according to your needs, and ask you if you need samples. If you need samples, we will provide them to you for free.
Shipping and receipt: After the sample is shipped, we will inform you and track the logistics information of the sample to ensure that you can receive it on time.

Get a free sample

The products provided by Zhenan Metallurgy can provide the following testing services through third-party testing agencies. These third-party testing services can provide independent, objective verification that products comply with relevant standards and regulations.

X-ray diffraction (XRD): used to determine the crystal structure and crystal phase of black silicon carbide.
Scanning electron microscope (SEM): can be used to observe and analyze the surface morphology and microstructure of black silicon carbide.
Energy spectrometer (EDS): By collecting the X-ray energy spectrum of the sample, the content and distribution of each element in the sample can be determined.
Infrared spectroscopy (IR): IR spectroscopy can be used to analyze the chemical bonds and functional groups of black silicon carbide samples.
Particle size analysis: used to measure the particle size and distribution of black silicon carbide particles.

Ask about third-party testing services
Contact Form

Leave a Comment

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

Decline all Services
Save
Accept all Services
Open Privacy settings
Price
Email
Whatsapp